Whether you purchase a well-constructed inner wall casing scraper or one with durable blades, at some point, you're going to need to maintain this oil-related instrument. Then you'll take a lot of complications out of the equation like rust. Here are some maintenance protocols that can keep you out of trouble with this cleaning instrument found readily in the oil industry.
Stay Mindful of the Blades
A lot of your focus throughout maintenance should be put on the blades attached to your inner wall casing scraper. They perform most of the cleaning action and need your attention to hold up. With that said, you want to stay mindful of their sharpness.
If you tried touching them too hard when cleaning them, you could cut yourself. They deserve your respect because of their inherent hazard. Just go slow and make sure you watch what you do to and around them throughout casing scraper maintenance.
Install Blades Correctly After Cleaning
There are a lot of casing scrapers that have detachable blades. That makes them a lot easier to clean because you'll have full coverage when using certain products. You just need to be careful setting the blades back up on your casing scraper.
Make sure you use the correct motions as to not damage the blades or hurt yourself during placement. If you're new to setting up blades on a casing scraper, there are guidelines that can show you exactly what to do.
See What Gear is Required for Safer Maintenance
In order to make your job a lot easier maintaining inner wall casing scrapers, you can purchase special products. For example, you can get professional-grade cleaners for components like blades and safety goggles to protect your eyes when blowing away debris with an air compressor.
You just want to make sure the gear you invest in and use is relevant to the type of maintenance you'll perform on your specific casing scraper. You can then properly protect your body regardless of the maintenance actions you perform on these scrapers to keep them holding up.
There are a lot of great casing scraper manufacturers that spend so much of their time refining designs and using high-quality materials. These things help these scrapers last and you can do your best to achieve a longer lifespan with this tool as well through maintenance. Once you're aware of certain care steps, you can simply carry them out over and over.