If the hoses on your hydraulic system ever become damaged, it's important to swap them out as quickly as possible before hydraulic fluid leaks all over the place. After finding a replacement, make sure you approach its installation in the following ways.
Give Hoses Enough Slack
Slacking is something to achieve regardless of what type of replacement hydraulic hoses you purchase for a system. After all, the system will probably cause vibrations when it's running but that's not going to cause hydraulic hoses to experience extra friction and wear when they're able to slack.
You just need to figure out how much slacking is necessary to prevent hose damage, but also ensure hoses don't interfere with surrounding systems. Look at the specific setup location for your hydraulic hoses to make the right assessments. Then you can provide just enough slack for optimal hydraulic hose performance going forward.
Use Fittings That Are Durable
In order to secure hydraulic hoses in place around a hydraulic system, you'll have to use fittings. You don't want them being able to break down because that could cause issues for these hoses, such as causing them to detach completely.
Spend time looking at the hydraulic hose fitting marketplace until you find fittings that are durable and rated to be around relevant environments. Then you can avoid issues like weathering that lead to rust and other structural issues. Spend time verifying the fitting quality and you'll have fewer worries about future fitting replacements.
Monitor Hoses After Setup
Once you get hoses set up on a hydraulic system, you want to continue monitoring them to see how they're holding up. You specifically need to keep an eye out for twisting. It's not something you want taking place because it could easily put these hoses through wear and thus cause them to break down.
If you monitor the hydraulic hoses for an extended period of time and no signs of twisting show up, that lets you know the hoses' placement was perfect and there are no further adjustments you need to make or concern yourself with.
Once you're able to find high-quality hoses for a hydraulic system, follow this up with a proper installation. Then there won't be lingering issues that cause you headaches like leaking. As long as you understand where these hoses are going and how to keep them firmly in place long-term, you'll succeed with this setup.
For more information, contact a company like Air & Hose Source Inc.